MACEDONIA
 Products  Support and others
Alpine S-Series: The Music Lovers Starter Pack
S2-A36F_S-Series-4-channel-Power-Amplifier S2-A36F_S-Series-4-channel-Power-Amplifier-top S2-A36F_S-Series-4-channel-Power-Amplifier-right-side S2-A36F_S-Series-4-channel-Power-Amplifier-left-side

S-Series 4-channel Power Amplifier - RMS Power Ratings 4 x 90W @ 2 Ohms

S2-A36F

The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.

The S-Series S2-A36F 4-channel amplifier delivers 60 Watts RMS @4 Ohms or 90 Watts RMS @2 Ohms of pristine high-fidelity signal to each of your car's front and rear speakers, adding sweet, clear sound to your vehicle.

The amp brings your music to life being Hi-Res Audio certified, with its precise details and emotional power clearly revealed with a frequency response up to 40kHz. For a 3-channel 2-way system, you could also use the amp to drive a pair of front speakers with 60 Watts RMS each, while powering a subwoofer with 180 Watts RMS from the bridged rear channels. A variable mid-bass boost on those rear channels allows you to dial in some extra kick and impact to your system's low-frequency sound. You can even add the optional wired remote RUX-KNOB2 to control the level of the rear channels from your front seat.

High- and low-pass filters put you in command of the frequency spectrum that reaches your speakers and subs. The amp includes preamp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box. 

S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration.

S-Series logo

minimizeButton
Информации за продукти

The New 2023 S-Series Amplifiers

The New 2023 S-Series Amplifiers

Entry-level sound just got elevated with the S2-A36F 4-Channel Amplifier. Its sleek redesign houses an Alpine Class-D Amplifier circuit and is now certified for Hi-Res Audio.

Hi-Res Audio Certified

Flexible Application

Hi-Res Audio Certified

The Next-Gen Alpine S-Series S2-A36F 4-Channel Amplifier is Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth coupled with the elevated S-Series design brings out a new benchmark for entry-level performance and price.

Flexible Application

The Next-Gen S-Series Amplifiers now feature a new selectable remote turn-on circuit, a three-position switch that ensures the amplifier turns on and off at the proper times. This design is crucial with newer, in-vehicle technology and allows for proper integration with any factory or aftermarket system.

Easy Control Access

Mid-Bass EQ

Easy Control Access

The amplifier was intentionally designed with sound controls located on the side panels, instead of the top panel, making it easier to access gain and crossover controls when installed under vehicle seats or in shallow-depth locations. Removable end-caps were added to cover the side controls and connections, providing a clean, sleek finish to the amplifier.

Mid-Bass EQ

With its new and unique variable Mid-Bass EQ Circuit, the S2-A36F allows you to dial in the mid-bass impact as desired, making it an ideal choice for those seeking a more dynamic and powerful audio experience.

Made for S-Series Speakers & Subs

Made for S-Series Speakers & Subs

The S-Series amplifiers are designed to perfectly match the Alpine S-Series speaker and subwoofer line for perfect system building. S-Series components are designed to for customers that want to build a great sounding system without breaking the bank, for a fun and great sounding experience including Hi-Res Audio capabilities.

Next-Gen Alpine S-Series Amplifiers: Power and Performance on a Budget

Next-Gen Alpine S-Series Amplifiers: Power and Performance on a Budget

 

Watch as Alpine Brooks gives you an overview of the next generation of Alpine S-Series Amplifiers, which are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on a budget. If you're looking to upgrade your car's factory audio system, the S-Series Amplifiers from Alpine could be for you.

00:00 - Intro

00:26 - Hi-Res Audio Certified

00:56 - Models & Overview

01:12 - Key Features of the 4 & 5 Channel Amps

02:41 - Key Features of Mono Amps

03:55 - Wrap Up

Опции и спецификации

FEATURES

Install

  • Terminal Layout: Two-sided
  • Included terminal covers
  • Screw terminals (for speaker and power cables)

General

  • Class-D Amplification (Digital)
  • Hi-Res Audio Certified
  • Channel Design: 4/3/2 Channel
  • Side panel controls
  • Thermal Management Control
  • Top Mounted LED Power/Status Indicator
  • Speaker Level Input
  • 3 turn-on modes (DC HI, Remote HI, Remote LO)
  • Crossover: Variable Low-pass Filter (LPF) and High-Pass Filter (HPF),
  • Adjustable Gain Control
  • Mid-Bass EQ
  • Remote Bass Control (RUX-KNOB2) Ready (for channel 3+4 in bridged mode only)

SPECIFICATIONS

RMS Power Ratings

  • Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 4 x 90W
  • Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 4 x 60W
  • Bridged, 4 Ohms, 14.4V: 2 x 180W

Sound Tuning

  • Crossover: Variable HPF/LPF: 50-400Hz (-12dB/oct )
  • Mid-Bass EQ (0 to +12dB)

General

  • Power Requirements: 14.4 V.DC (9 - 16 V allowable)
  • Input Sensitivity (RCA Input): Hi: 0.5V - 10V / Low: 0.2V - 4.0V
  • High Level Input with automatic power on
  • Cable size: Power Cable AWG 4, SPK Cable AWG 8
  • Frequency Response: 10Hz – 40kHz
  • THD+N (@ 10W into 4 Ohms): <0.03%
  • Damping Factor: >100
  • Weight: 2.2kg

Dimensions

  • Heat Sink (WxHxD) mm: 220 x 57 x 210
Подршка
Симнување на упатства

OM_S2-A36F_S2-A55V_EN.pdf